Universal Quick Mixer, Type USM

The product is fed into the mixing bin either by means of a filling device at the top or by the optional lower feed hopper.

At the bottom of the mixing bin it is captured by the centrally-arranged mixing screw and is conveyed upwards through the mixing tube. At the top of the screw an ejector throws the material down, spreading it in fine layers over the full section of the mixing bin.
The mixer screw is driven from the top by means of a geared motor. In case of height problems, it is also possible to install a collateral threephase motor with a v-belt.

The mixing effect is achieved by the movement of the screw, by the above-mentioned spread over the entire area and by the material’s uneven slipping within the cone.
Practice has shown that mixture ratios of up to 1:100.000 can be attained.
After the mixing procedure the mixing bin can be discharged via one or several outlet pipes. It is also possible to pneumatically convey the product via a tube. Much time can be saved thanks to the intensive and continued mixing which is guaranteed already while the mixer is filled.